Advertisement
Below is the distribution board (AE-239, -244, -23E, -23F) that draws power from a
30/60/95W PoE PSE. Note that the AE-239 and AE-244 provide 12V DC output.
PoE power LED
PoE IN
PoE OUT
The PoE version housings have the same terminal pinouts with that of the 24V power
source models:
DO2
Tank water pump control, connects to IP camera's DO for manually triggering
washer.
DI2
Wiper control.
RS485+
RS485+, RS485- can be used to control IR illuminator beam angles, etc.
RS485-
RS485-
DO+
+5V VCC
DI-
GND
DO1
IR LED status
DI1
IR control, synchronizes day/night mode switching for IP camera. It is related to IR
cut filter.
I/O terminal block
24V DC OUT
Wiper / Camera heater
Connectors to
the front IR
Heater
Blower
IR angle selector
9
Advertisement
