Advertisement
Quick Links
Advertisement
Related Manuals for Vivotek AM-516
Summary of Contents for Vivotek AM-516
- Page 1 AM-516 Adaptor Ring User’s Manual Complies with FD8162 fixed dome camera Rev. 1.0 IP Sur veillance...
- Page 2 2. to a 4" or 4 " US standard, metal junction box. 11/16 You may also refer to VIVOTEK's website for the list of supported models. Installation with a Wall-mount Bracket (AM-211) Mounting Hole Definitions Above are the locations of different groups of mounting holes for matching different cameras: Use the A group holes for FD8162.
- Page 3 Refer to the table below for the description of the included screws: Screw Description Quantity Applies to M4X15 Phillips pan head A holes M3X6 Phillips pan head D holes for PZ and PT series M4X8XD6 Phillips pan B holes head M4X25XD9 Phillips pan Securing the head...
-
Page 4: Wall Mount Installation
Wall Mount Installation Below is a sample procedure using AM-211 wall mount bracket and an FD8162: 1. Determine a hard surface wall location, and use the four mounting holes on the bracket to mark the positions where holes will be drilled to secure the bracket. A* holes M4X15 Camera Lens Orientation... - Page 5 6. Secure the camera to the adaptor ring using the included screws. 7. Connect power lines and cables to the camera. 8. Proceed with initial setup such as enabling network access, focus tuning, or zooming. When done, secure the outer dome cover. NOTE: Use the correct type of screws when installing cameras to the mounting cap.
- Page 6 Ceiling Mount to a Junction Box Below are the basic dimensions of standard, US style, 4 in. or 4 11/16 in. junction boxes. The AM-516 adaptor ring complies with such junction box. 6.75 [17/64] DIA. HOLE MIN. OF FOUR D KNOCKOUTS, TWO LOCATED AS SHOWN REQD.
- Page 7 Orient the adaptor ring to match the tap holes on the junction box, so that the camera's shooting angle can be more easily directed to the area of your interest, although the camera comes with mechanisms to adjust lens orientation. Note that the junction box should be able to carry a weight of at least 3 kilograms.
- Page 8 This page is intentionally left blank.