Related Manuals for Vivotek Bullet Series
Summary of Contents for Vivotek Bullet Series
- Page 1 VIVOTEK Bullet Series J-Mount Bracket Installation Guide Using AM-11C J-mount bracket Rev. 1.0 Accessory ordering part no.: 900029400G_ Part no.: 625032000G IP Sur veillance...
-
Page 2: Installation
IP8355H, IP8355EH, IP8365H, IP8365EH, IP8371, IP8371E, IB8373-EH, IP8372, IB8381, IB8381-E You may also refer to VIVOTEK's website for the list of supported models. Support for other models can be available through time. Package Contents: AM-11C, Installation Guide, screw pack, 1x hex wrench. - Page 3 2. Prepare an Ethernet CAT5e cable and strip part of the cable sheath. Pass the cable through the bracket using a pull string 3. Fasten an intersection bracket to the side of camera. Use the included cable gland to make sure the Ethernet connection is waterproof.
- Page 4 4. Push the spring mortise and hook the bracket onto the groove on the ceiling mount bracket.
- Page 5 5. Secure the installation by fastening two socket screws on the other side of the camera. 6. Loosen the socket screws on the bracket to adjust the camera's shooting direction. When done, fasten the retention screw. Please refer to the camera's documentation for more details about camera installation.
- Page 6 This page is intentionally left blank.
- Page 7 This page is intentionally left blank.
- Page 8 This page is intentionally left blank.