Maintenance; Compressor Maintenance; Checking Safety Relief Valve - Champion 30000 Owner's And Operator's Manual

Maintenance

The owner/operator is responsible for all
periodic maintenance.
WARNING
Improper maintenance will void your warranty.
Make sure to consistently drain moisture
from tank before and after each use.
NOTE
For service or parts assistance, contact our toll-
free help line at 1-877-338-0999.
Rev 30000-20080208
Maintenance

Compressor Maintenance

Checking Safety Relief Valve

1. Turn air compressor off and disconnect
from power source
2. Release tank pressure by opening tank
drain
3. Allow compressor to fully cool
4. Grasp wire ring on safety relief valve.
Pull and release the ring a few times to
verify plunger movement
5. Replace safety relief valve if plunger is
not functioning properly.
7