Eco-mode for power saving
Eco-mode allows to save battery life by shortening standby delay time. By default your terminal
is preconfigured with default standard values for Eco-mode.
You can change Eco-mode setting by pressing the dot button
, terminal will display Power
Management screen. You can chose from two options:
Backlight
Parameter setup in seconds. When setup, after e.g 5 seconds terminal display and keyboard
switch off backlighting. As soon as the user presses any button terminal backlighting is back.
Standby
Parameter setup in minutes. When setup, after e.g 1 minute terminal automatically switch power
off. As soon as the user presses any button terminal power is back. Standby is only available on
terminals containing a battery.
6