Table of Contents
Advertisement
XL
DÉSA
| Instruction Manual | System Setup Options
8.3 Hardware Setup Tab
8.3.1 Camera Setup
8.3.1.1
Use the Camera Setup section of the
Hardware Setup tab to Enable (Disable)
cameras connected to the system. Check
the box to enable camera input; uncheck
the box to disable camera input.
NOTE: Unchecking the box for a camera also disables
that camera in the Screen Division tab, and in the External Monitor section of the Hardware Setup tab. Re-enabling
the camera DOES NOT automatically re-enable these settings. The settings need to be manually restored.
8.3.1.2
Cam. ID enables logical numbering of every camera in the system; typically used when multiple
XL
DÉSA
system for control. The Cam. ID must match the address of the connected AutoDome.
8.3.1.3
Name allows a camera description to be associated with each camera. Character length is limited to
13 uppercase characters or 14 lowercase characters.
8.3.1.4
Sensor associates the physical sensors (alarm inputs) to a specific camera. Multiple sensors can be
associated with multiple cameras by separating the sensor numbers by commas i.e. 1,2,3, etc.
Bosch Security Systems | November 17, 2004
comprise a large system. Cam. ID directly relates to AutoDomes connected to the DÉSA
EN | 20
XL
Advertisement
Table of Contents
