Interpreting The Amc Leds - PaloAlto Networks PA-7000 Series Hardware Reference Manual

Networks enterprise firewall
Hide thumbs Also See for PA-7000 Series:
Table of Contents

Advertisement

Table 10. LPC and AMC features (Continued)
Item
3.
Advanced Mezzanine
Card (AMC) release
handle.
4.
AMC (disk drive) LED
panel
5.
Mounting Screws
6.
LPC installation and
removal hardware

Interpreting the AMC LEDs

The following describes how to interpret the LEDs located on the front of the AMC. The Log
Processing Card (LPC) does not have LEDs. If there is a hardware issue with the LPC, the LOG LED
on the Switch Management Card (SMC) changes to red and the firewall generates a system log.
Table 11. Functions and States of the LPC LEDs
LED
Activity
Fault
POWER
Palo Alto Networks
Description
Handle used to remove the AMC and disk drive from the LPC card. Pull
the handle toward you to unlock and remove the AMC. After installing an
AMC into the LPC, push the handle in to lock the AMC to the LPC.
Three LEDs that indicate drive activity, drive failure, and drive power. Top
left is activity, bottom left is fault, and top right is power.
One screw on each side of the LPC that you use to secure the LPC to the
chassis.
Release levers and screws that you use to install and remove the LPC card.
The LPC uses a double-lever on each side of the card. After loosening the
thumb screws, you must pull the inner lever toward you to unlock the outer
lever from the chassis and then pull the outer lever toward you to release
the card from the chassis.
When installing the card, push the outer lever in to lock the inner lever.
The left and right inner levers have a micro-switch that will power
off the card as soon as they are pulled to unlock the outer lever.
State
Description
Green
The LED blinks green when there is drive activity.
Off
The LED is off if there is no activity.
Red
The LED is red if a drive is missing or faulty.
Off
The LED is off during normal operation.
Green
The LED is green if the drive is powered.
Off
The LED is off if the drive is not receiving power.
PA-7000 Series Module and Interface Card Information • 31
Log Processing Card (LPC)

Advertisement

Table of Contents
loading

Table of Contents