Interpreting the Device LEDs
Figure 6 shows the LEDs on the front panel of the PA-2000 Series.
Figure 6. Front Panel LEDs
Table 3 describes the LED functions and states.
Table 3. LED Functions and States
Interface
POWER
STATUS
FANS
HA
ALARM
TEMP
Interpreting the Port LEDs
Each Ethernet port on the PA-2000 Series has two LEDs. Table 4 describes the LEDs.
Table 4. Port LEDs
LED
Left
Right
Palo Alto Networks
State
Description
Green
The device is powered.
Off
Power is off.
Green
The device is operating normally.
Yellow
The device is booting up.
Green
All fans are operating normally.
Red
One or more fans have failed.
Green
This device is the current active device.
Yellow
This device is the current passive device.
Off
High availability is not enabled on this device.
Red
There is a hardware failure, which may include power supply
detected but not working, fan failure, HA failover, or temperature
above high temperature threshold.
Off
The device is operating normally.
Green
The temperature is normal.
Yellow
The temperature is outside the normal tolerance.
Description
Shows green if there is a network link.
Blinks if there is network activity.
Interpreting the Device LEDs
Maintaining the Hardware • 15