Sharp XV-Z21000 Operation Manual page 11

Projector (Rear View)
Intake vent
Kensington Security
Standard connector
Exhaust vent
Remote control
sensor
AC socket
Connect the sup-
plied power cord.
Terminals
Terminal
COMPONENT/RGB1, 2 terminals
1
Connecting video equipment with component output terminal (DVD player, etc.) or a com-
puter with analog RGB output terminal.
S-VIDEO terminal
2
Connecting video equipment with S-video output terminal (DVD player, VCR, etc.).
VIDEO terminal
3
Connecting video equipment without S-video output terminal.
DVI terminal
4
Connecting video equipment with DVI output terminal (DVD player, DTV decoder, computer,
etc.).
HDMI1, 2 terminals
5
Connecting video equipment with HDMI output terminal.
RS-232C terminal
6
Connecting a computer to control the projector.
TRIGGER terminal
When the projector is turned on, a control signal (DC 12V) outputs from this terminal. If an
7
electric screen or other compatible device is connected, it can be turned on when the projector
is turned on.
WIRED REMOTE control input terminal
8
Connecting the remote control via a cable when the projector is placed out of the reach of
remote control signals.
Using the Kensington Lock
• This projector has a Kensington Security Standard connector for use with a Kensington MicroSaver Security System.
Refer to the information that came with the system for instructions on how to use it to secure the projector.
Downloaded From projector-manual.com Sharp Manuals
47
47
11
25
Description
47
Intake vent
Page
20, 21
22
22
18-20, 23
18
24
—
10
-9