Table of Contents
Advertisement
Auto Power Off
e Adjusting the Unveil Control
4 Adjusting the White Level/Black
This function automatically switches the projector
to Standby mode if no signals are received for a set
This function uses edge enhancement to give the
period.
impression of added depth to images.
"White Level" adjusts the white level for variations in
the input signals.
Selectable items
Selectable items
"Black Level" adjusts the black level for variations in
ON
Off
the input signals.
Level 1
Selectable
OFF
Level 2
Level 3
White Level
3 Selecting the Gamma Position
r Adjusting the Automatic Contrast
Black Level
This function allows you to select the desired gamma
• When the Auto Power Off function is set to "ON",
position.
This function automatically adjusts the image contrast
See page 40 for details.
5 minutes before the projector enters standby
to suit the scene.
mode, the message "Enter STANDBY mode in
Selectable items
X min." will appear on the screen to indicate the
• You cannot adjust the white and black levels
Note
Off
remaining minutes.
when inputting a digital signal.
• Gamma can be adjusted in greater detail with
• When the Auto Power Off function is set to "OFF",
Level 1
"Gamma" on the menu screen.
"LED" is set to "On" automatically. Be sure to set
5 Turning LED Off
Level 2
r " to select the item
the Auto Power Off function to "ON" to use the
Level 3
LED Off function. (See page 43.)
o adjust.
4 Switching the Iris Setting
LEDs (indicators) on the projector can be turned off when
lecting •BrightŽ )
they are disturbing the projection.
t Resetting All Adjustment Items
This function controls the quantity of the projected light
e Selecting the Transmission
Selectable items
and the contrast of the image.
This function allows you to reset all adjustment items to
On
Selectable items
the default setting.
Off
High Brightness
High brightness is given priority over
Make sure that both the projector and computer are set
Selectable items
high contrast.
for the same baud rate.
No
NTER.
Medium Mode
Intermediate mode between high con-
Main menu
Yes
Selectable items
trast and high brightness.
ed adjustment item (e.g.
Options
9600bps
High Contrast
High contrast is given priority over high
Page 42
be displayed at the bottom
brightness.
n.
38400bps
r " is pressed, the next
• When Auto Power Off function is set to "OFF",
115200bps
Note
displayed. (e.g. •BrightŽ is
"LED" is set to "On" automatically. Be sure to set
th •ColorŽ by pressing ".)
Auto Power Off function to "ON" to use LED Off
• You can also use
function. (See page 45.)
to change the Iris. (See page 29.)
r Fan Mode Setting
tion
eq
This function changes the fan rotation speed.
eq
6 Checking the Lamp Life Status
5 Lamp Setting
RETURN to return to the
Selectable items
screen.
You can confi rm the cumulative lamp usage time and
Normal
peed
the remaining lamp life (percentage).
High
Select-
Bright-
Fan
r \ to adjust the item
able items
ness
sound
Bright
100%
Normal
ment is stored.
•
When "Fan Mode" is set to "High", the fan rotation
Operated exclusively with
menu items, press | to dis-
speeds up, and the fan noise becomes louder.
Lamp Setting set to "Eco +
bmenu and press ' or "
Quiet"
Eco +
Approx.
Low
adjustment item, and then
Operated exclusively with
Quiet
80%
TER.
Lamp Setting set to "Bright"
ENU.
Note
creen will disappear.
• When "Lamp Setting" is set to "Eco+Quiet", the
power consumption will decrease and the lamp
life will extend. (Projection brightness decreases
approximately 20%.)
XVZ21000_E_Ousyu_P36-45.indd 45
XVZ21000_E_Ousyu_P36-45.indd 39
XVZ21000_E_Ousyu_P36-45.indd 45
XVZ21000_E_Ousyu_P36-45.indd 43
XVZ21000_E_Ousyu_P36-45.indd 43
XVZ21000_E_Ousyu_P36-45.indd 39
Downloaded From projector-manual.com Sharp Manuals
Downloaded From projector-manual.com Sharp Manuals
Downloaded From projector-manual.com Sharp Manuals
Level
When no input signal is detected for
The Unveil Control function is not
more than 15 minutes, the projector will
activated.
automatically enter standby mode.
Sets the Unveil Control level for viewing
\ button
The Auto Power Off function will be
an image with the impression of added
items
disabled.
depth.
Gives better color re-
production.
Darkens the image.
Note
Note
The Automatic Contrast function is
not activated.
Sets the Automatic Contrast level.
Speed (RS-232C)
LEDs are turned on.
Description
LEDs are turned off while the projector
is in operation. (LEDs turn on while
Single-
the projector is in the standby mode,
Does not do resetting.
adjustment
warming up or indicating problems.)
Sub menu
Resets all adjustment items.
items
... 30
+30
Image Shift
Transmission speed is slow.
Page 42
Note
Subtitle
... 30
+30
Page 42
Overscan
10
0%
Transmission speed is rapid.
Page 42
Reset
IRIS on the remote control
Page 42
White Level
... 30
+30
Black Level
... 30
+30
Page 43
LED
Page 43
Suitable for normal environments.
Lamp Timer(Life)
Power
Page 43
Select this when using the projector at
consumption
Lamp Life
OSD Display
altitudes of approximately 4,900 feet
(When using
Page 43
Lamp usage condition
(1,500 meters) or more.
AC 100V)
When S-VIDEO or VIDEO is
"Life"
selected for the input mode
320W
Approx.
Video System
Approx.
2,000
Page 43
3,000
hours
hours
265W
Approx.
Approx.
3,000
2,000
hours
When COMPONENT is selected
hours
for the input mode
Signal Type
Page 44
When DVI is selected for the
input mode
When HDMI is selected for the
input mode
*2
Color Space
Page 44
Description
Description
| button
Gives brighter and
6 Using the Advanced
sharper images.
Brightens the image.
"Advanced" allows you to make even fi ner adjustments
to the image so that it appears just the way you want
it to.
To display the Advanced menu, select "Advanced" and
Description
press
ENTER.
Note
• When the "Advanced" settings are displayed,
select "Advanced" again and press
to return to the "Picture" menu.
7 Adjusting the Colors
Description
Select "C.M.S." (Color Management System) in the
"Advanced" menu and then press
Description
This function adjusts each of the six main colors that
comprise the color wheel, altering their "Hue", "Satura-
Description
tion", or "Value".
Selectable items
C.M.S.-Hue
C.M.S.-Saturation
C.M.S.-Value
Reset
Adjusting "Hue", "Saturation", or "Value".
1 Press ' or " to select either "Hue", "Saturation", or
On
Description
Off
"Value" and then press
2 Select the color to be adjusted with ' or " and
adjust it with \ or |.
On
Off
Remaining lamp life
•
When you press
100%
selected system color will be displayed at the bottom
5%
Auto
of the screen. Use this bar to make adjustments while
Approx.
PAL
150
viewing the effects on-screen.
SECAM
hours
NTSC4.43
NTSC3.58
Example of adjusting the "Hue"
Approx.
PAL-M
PAL-N
100
Main colors
PAL-60
hours
Red
Closer to magenta
Auto
RGB
Yellow
Closer to red
Component
Green
Closer to yellow
D.PC RGB
Cyan
Closer to green
D.PC COMP.
D.VIDEO RGB
Blue
Closer to cyan
D.VIDEO COMP.
A. RGB
Magenta
Closer to blue
A. COMP.
•
When "Saturation" is selected, the selected color
Auto
becomes lighter (\) or thicker (|).
RGB
YCbCr4:4:4
•
When "Value" is selected, the selected color be-
YCbCr4:2:2
comes darker (\) or brighter (|).
Auto
•
To reset the adjustment values of each color to the
ITU601
t Reversing/Inverting Projected
Note
Images
• It is recommended that the lamp be changed
This function allows the projector to be used in a wider
when the remaining lamp life becomes 5%.
range of projection styles by allowing the image to be
• The lamp life may vary depending on the usage
inverted to suit the projection environment (location).
condition.
Selectable items
Front
Normal image (Projected from the front
7 Setting On-screen Display
Menu operation ⇒ Page 34
of the screen)
Ceiling + Front
Inverted image (Projected from the
Selectable items
front of the screen with an inverted
projector)
On
All on-screen displays are displayed.
Rear
Reversed image (Projected from the
Off
Only the menus, input mode menu, the
rear of the screen or with a mirror)
adjustment bars for contrast and bright-
Ceiling + Rear
Reversed and inverted image (Pro-
ness and the warning messages (power
jected with a mirror)
off, temperature, lamp replacement,
See page 15 for details of Projection (PRJ) Mode.
etc.) are displayed.
•
y Returning to the Default Settings
8 Setting the Video System
Use "All Reset" to initialize all the adjustments you have
When the input mode is S-VIDEO or VIDEO input, adjust-
made to the default settings.
ment items for the "Video System" mode can be set.
The video input system mode is factory preset to "Auto";
Note
however, a clear picture from the connected audio-visual
equipment may not be received, depending on the video
The following items cannot be initialized.
signal difference. In that case, switch the video signal.
• "Fine Sync" menu
— Special Modes
Selectable items
• "Options" menu
ENTER.
PAL
When connected to PAL video
— Lamp Timer (Life)
equipment.
— Language
SECAM
When connected to SECAM video
equipment.
NTSC4.43
When reproducing NTSC signals in
Description
PAL video equipment.
Sets the hue of the main colors.
Other Function
NTSC3.58
When connected to NTSC video
Sets the Saturation of the main colors
equipment.
Sets the Value of the main colors.
Selecting the On-screen
The adjustments of "Hue", "Saturation"
and "Value" of all colors are reset to the
Display Language
default setting.
The projector can switch the on-screen display language
among 11 languages.
ENTER.
English
Français
Deutsch
Italiano
Español
Svenska
ENTER, the adjustment bar for the
Nederlands
Português
\ button
| button
Closer to yellow
Closer to green
Closer to cyan
Closer to blue
Closer to magenta
Closer to red
Menu operation ⇒ Page 34
Menu operation ⇒ Page 34
Menu operation ⇒ Page 34
Description
Description
ENTER
Description
2006/07
2006/07
2006/07
2006/07
2006/07
2006/07
-
-
-
Advertisement
Table of Contents
