Settings - Sharp XV-Z21000 Operation Manual

Auto Power Off
This function automatically switches the projector
to Standby mode if no signals are received for a set
This function uses edge enhancement to give the
period.
impression of added depth to images.
White Level adjusts the white level for variations in
the input signals.
Selectable items
Selectable items
Black Level adjusts the black level for variations in
ON
Off
the input signals.
Level 1
Selectable
OFF
Level 2
Level 3
Ωhite Level
Selecting the Gamma Position
Black Level
This function allows you to select the desired gamma
When the Auto Power Off function is set to ON ,
position.
This function automatically adjusts the image contrast
See page 40 for details. 5 minutes before the projector enters standby
to suit the scene.
mode, the message Enter STANDBY mode in
Selectable items
X min. will appear on the screen to indicate the
You cannot adjust the white and black levels
Note
Off
remaining minutes.
when inputting a digital signal.
Gamma can be adjusted in greater detail with
When the Auto Power Off function is set to OFF ,
Level 1
Gamma on the menu screen.
Level 2
r " to select the item
the Auto Power Off function to ON to use the
Level 3
LED Off function. (See page 43.)
o adjust.
Switching the Iris Setting
LEDs (indicators) on the projector can be turned off when
lecting "Bright")
they are disturbing the projection.
This function controls the quantity of the projected light
Selectable items
and the contrast of the image.
st the projected
This function allows you to reset all adjustment items to
On
Selectable items
the default setting.
Off
while viewing it
High Brightness High brightness is given priority over
Make sure that both the projector and computer are set
Selectable items
high contrast.
for the same baud rate.
No
Medium Mode Intermediate mode between high con-
NTER.
Main menu
Yes
trast and high brightness.
Selectable items
ed adjustment item (e.g.
Options
9600bps
High Contrast High contrast is given priority over high
Page 42
l be displayed at the bottom
brightness.
38400bps
n.
r " is pressed, the next
When Auto Power Off function is set to OFF ,
115200bps
Note
displayed. (e.g. "Bright" is
th "Color" by pressing ".)
Auto Power Off function to ON to use LED Off
You can also use
function. (See page 45.)
to change the Iris. (See page 29.)
tion
eq
This function changes the fan rotation speed.
eq
Lamp Setting
RETURN to return to the
Selectable items
screen.
Normal
You can con rm the cumulative lamp usage time and
peed
the remaining lamp life (percentage). High
Select- Bright- Fan
r \ to adjust the item
able items ness sound
Bright 100% Normal
ment is stored.
When Fan Mode is set to High , the fan rotation
Operated exclusively with
menu items, press | to dis-
speeds up, and the fan noise becomes louder.
Lamp Setting set to Eco +
bmenu and press ' or "
Quiet
Eco + Approx. Low
adjustment item, and then
Operated exclusively with
Quiet 80%
Lamp Setting set to Bright
TER.
ENU.
Note
creen will disappear.
When Lamp Setting is set to Eco+Quiet , the
power consumption will decrease and the lamp
life will extend. (Projection brightness decreases
approximately 20%.)
XVZ21000_E_Ousyu_P36-45.indd 43 XVZ21000_E_Ousyu_P36-45.indd 43 XVZ21000_E_Ousyu_P36-45.indd 39 XVZ21000_E_Ousyu_P36-45.indd 39 XVZ21000_E_Ousyu_P36-45.indd 45 XVZ21000_E_Ousyu_P36-45.indd 45
Downloaded From projector-manual.com Sharp Manuals Downloaded From projector-manual.com Sharp Manuals Downloaded From projector-manual.com Sharp Manuals
Adjusting the White Level/Black Adjusting the Unveil Control
Level
Ωhen no input signal is detected for
The Unveil Control function is not
more than 15 minutes, the projector will
activated.
automatically enter standby mode.
Sets the Unveil Control level for viewing
The Auto Power Off function will be
\ button
an image with the impression of added
items
disabled.
depth.
Gives better color re-
production.
Darkens the image. Brightens the image.
Adjusting the Automatic Contrast
Note
Note
The Automatic Contrast function is
not activated.
LED is set to On automatically. Be sure to set
Sets the Automatic Contrast level.
Turning LED Off
Resetting All Adjustment Items
Selecting the Transmission
Speed (RS-232C)
LEDs are turned on.
Description
LEDs are turned off while the projector
is in operation. (LEDs turn on while
Single-
the projector is in the standby mode,
Does not do resetting.
adjustment
warming up or indicating problems.)
Sub menu
Resets all adjustment items.
items
– 30 +30
Image Shift
Transmission speed is slow.
Page 42
Note Subtitle – 30 +30
Page 42
Overscan 10 0%
Transmission speed is rapid.
Page 42
LED is set to On automatically. Be sure to set
Reset
IRIS on the remote control
Page 42
Fan Mode Setting
White Level – 30 +30
Black Level
– 30 +30
Page 43
Checking the Lamp Life Status
LED
Page 43
Suitable for normal environments.
Lamp Timer(Life)
Power
Page 43
Select this when using the projector at
consumption
Lamp Life
OSD Display altitudes of approximately 4,900 feet
(When using
Page 43
Lamp usage condition
(1,500 meters) or more.
AC 100V)
When S-VIDEO or VIDEO is
Life
selected for the input mode
320Ω Approx.
Video System Approx.
2,000
Page 43
3,000
hours
hours
265Ω Approx.
Approx.
3,000
2,000
hours
When COMPONENT is selected
hours
for the input mode
Signal Type
Page 44
When DVI is selected for the
input mode
When HDMI is selected for the
input mode
*2
Color Space
Page 44
Description
Description
| button
Gives brighter and
sharper images.
Using the Advanced
Advanced allows you to make even ner adjustments
to the image so that it appears just the way you want
it to.
To display the Advanced menu, select Advanced and
Description
press ENTER.
Note
When the Advanced settings are displayed,
select Advanced again and press
to return to the Picture menu.
Adjusting the Colors
Description
Select C.M.S. (Color Management System) in the
Advanced menu and then press
Description
This function adjusts each of the six main colors that
comprise the color wheel, altering their Hue , Satura-
Description
tion , or Value .
Selectable items
C.M.S.-Hue Sets the hue of the main colors.
C.M.S.-Saturation Sets the Saturation of the main colors
C.M.S.-Value Sets the Value of the main colors.
Reset The adjustments of Hue, Saturation
Adjusting Hue , Saturation , or Value .
Press ' or " to select either Hue , Saturation , or
On
Description
Off
Value and then press
Select the color to be adjusted with ' or " and
adjust it with \ or |.
On
Off
Remaining lamp life
When you press
100% selected system color will be displayed at the bottom 5%
Approx.
Auto of the screen. Use this bar to make adjustments while
PAL
150
viewing the effects on-screen.
SECAM
hours
NTSC4.43
NTSC3.58
Example of adjusting the Hue
Approx.
PAL-M
100
PAL-N
Main colors
PAL-60
hours
Red Closer to magenta
Auto
RGB Yellow Closer to red
Component
Green Closer to yellow
D.PC RGB
Cyan Closer to green
D.PC COMP.
Blue Closer to cyan
D.VIDEO RGB
D.VIDEO COMP.
Magenta Closer to blue
A. RGB
A. COMP.
When Saturation is selected, the selected color
Auto
becomes lighter (\) or thicker (|).
RGB
YCbCr4:4:4
When Value is selected, the selected color be-
YCbCr4:2:2
comes darker (\) or brighter (|).
Auto
To reset the adjustment values of each color to the
ITU601
Reversing/Inverting Projected
Note
Images
It is recommended that the lamp be changed
This function allows the projector to be used in a wider
when the remaining lamp life becomes 5%.
range of projection styles by allowing the image to be
The lamp life may vary depending on the usage
inverted to suit the projection environment (location).
condition.
Selectable items
Front Normal image (Projected from the front
Setting On-screen Display
of the screen)
Menu operation
Ceiling + Front Inverted image (Projected from the
front of the screen with an inverted
Selectable items
projector)
On All on-screen displays are displayed.
Rear Reversed image (Projected from the
Off Only the menus, input mode menu, the
rear of the screen or with a mirror)
adjustment bars for contrast and bright-
Ceiling + Rear Reversed and inverted image (Pro- ness and the warning messages (power
jected with a mirror)
off, temperature, lamp replacement,
etc.) are displayed.
See page 15 for details of Projection (PRJ) Mode.
Returning to the Default Settings
Setting the Video System
Use All Reset to initialize all the adjustments you have
When the input mode is S-VIDEO or VIDEO input, adjust-
made to the default settings.
ment items for the Video System mode can be set.
The video input system mode is factory preset to Auto ;
Note
however, a clear picture from the connected audio-visual
equipment may not be received, depending on the video
The following items cannot be initialized.
signal difference. In that case, switch the video signal.
Fine Sync menu
Special Modes
Selectable items
Options menu
ENTER.
PAL Ωhen connected to PAL video
Lamp Timer (Life)
equipment.
Language
SECAM Ωhen connected to SECAM video
equipment.
NTSC4.43 Ωhen reproducing NTSC signals in
Description
PAL video equipment.
Other Function
NTSC3.58 Ωhen connected to NTSC video
equipment.
Selecting the On-screen
and Value of all colors are reset to the
Display Language
default setting.
The projector can switch the on-screen display language
among 11 languages.
ENTER.
English Français
Deutsch Italiano
Español Svenska
ENTER, the adjustment bar for the
Nederlands Português
\ button | button
Closer to yellow
Closer to green
Closer to cyan
Closer to blue
Closer to magenta
Closer to red
Page 34 Page 34 Page 34
Menu operation Menu operation Menu operation
Description
Page 34
Description
ENTER
Description
2006/07 2006/07 2006/07 2006/07 2006/07 2006/07
- - -