Card Installation
the top ejector handle against the front of the card. Tightening the captive Phillips #2 screw within the top
ejector handle secures the subhandle and circuit card to the card cage.
Figure 11: Card Ejector Handle
1
3
Circuit Cards
The installation procedure described below is identical for all circuit cards in the chassis. Circuit cards include:
SSC, FSC, DPC/UDPC, DPC2/UDP2, MIO/UMIO.
Ejector handle
Captive screw (Phillips #2)
2
Ejector subhandle (interlock)
ASR 5500 Installation Guide
Circuit Cards
53