Card Installation; Card Slot Assignments - Cisco ASR 5500 Installation Manual

Card Installation

This chapter describes how to install circuit cards and baffles in the ASR 5500 chassis.
It includes the following sections:
•
•
•
•
•
•

Card Slot Assignments

The tables below show recommended card slot assignments for typical installation scenarios. The recommended
card assignments are based on the multiple power planes sourcing power to the card slots. Refer to the Power
Planes section of the Power Cabling chapter for additional information.
Following the recommendations preserves redundant operation if input power is lost to one or more of the
power circuits on the PFUs.
Table 7: ASR 5500 Chassis Card Slot Assignments (prior to StarOS 18.0)
Slot
Rear of Chassis
1
2
3
4
5
Card Slot Assignments, page 49
General Installation Sequence, page 51
Card Interlock Switch, page 52
Circuit Cards, page 53
Baffles, page 55
Save Shipping Cartons, page 57
Card Sequence
DPC-5 or UDPC-5
DPC-3 or UDPC-3
DPC-1 or UDPC-1
DPC-7 or UDPC-7
MIO-1 or UMIO-1
5
C H A P T E R
Requirement
Available
Required for all systems
Required for all systems
Available
Required for all systems
ASR 5500 Installation Guide
49