General Installation Sequence - Cisco ASR 5500 Installation Manual

Card Installation
Slot
Front of Chassis
11
12
13
14
15
16
17
18
19
20

General Installation Sequence

Circuit cards and baffles are installed in the ASR 5500 chassis as follows:
• Front circuit cards and baffles are installed from Right to Left. Start at slot 20 and continue to slot 11.
• Rear circuit cards and baffles are installed from Left to Right. Start at slot 1 and continue to slot 10.
Complete the installation of each card (includes securing the card in the chassis using a Phillips #2 screwdriver
before proceeding to the next card.
You can install all circuit cards and then install baffles to cover empty chassis slots. It does not matter whether
you install all front cards or all rear cards first.
Card Sequence
SSC-2
SSC-1
FSC-6
FSC-4
FSC-2
FSC-3
FSC-1
FSC-5
Reserved
Reserved
Slots 19 and 20 always require baffles.

General Installation Sequence

Requirement
Required for all systems
Required for all systems
Available
Required for all systems
Required for all systems
Required for all systems
Required for all systems
Available
ASR 5500 Installation Guide
51