Upgrade - HIKVISION DS-6102HLI-T User Manual

2. Adjust the transmission bitrate according to the actual network bandwidth.

The buttons of the device or the icons on the screen are out of use.
Possible Reason:
The device crashes.
Solution:
Reboot the device and try it again.

The network transmission indicator does not light and the device is offline on the platform.
Possible Reasons:
a) 3G dialing failure.
b) The platform settings are incorrect.
Solutions:
1. Check the 3G dialing status. Configure the 3G dialing settings again if needed.
2. Configure the platform settings again according to the actual needs.
3. Restore the device to factory settings and configure the parameters after the device reboot.

The network transmission indicator lights and the device is offline on the platform.
Possible Reason:
The platform settings are incorrect or have not been configured.
Solution:
Check and configure the parameters on the platform side.

The fingerprint cannot be recognized.
Possible Reason:
The fingerprint information has not been registered on the device.
Solution:
Register the fingerprint information on the device first.
15.2

Upgrade

Steps:
1. Connect the device to the computer via a USB cable after logging in to the system. And then turn on the USB storage
of the device.
2. Select the disk directory of the device on the computer, and then copy the upgrade package to the storage space of
device.
It is recommended to store the upgrade package under the system root directory.
3. Turn off the USB storage, disconnect the device from the computer and then power off the device.
4. Restart the device, and at the same time long press the Audio+ button on the device for 15 seconds. You will enter the
System Upgrade interface. 4 options are selectable and you can select the item using the Audio+ and Audio- button.

Reboot System Now: Reboot the device.

Apply Update from ADB: Upgrade device by package stored on the computer (not recommended).

Install Package from SD Card: Select it when the upgrade package is stored on the internal SD card.
User Manual of Portable Video Recorder
101