Installing And Uninstalling The External Camera - HIKVISION DS-6102HLI-T User Manual

1. Remove the battery
Loosen the 4 set screws on the rear panel of the device
using a straight screwdriver, and then remove the back
cover and battery.
2. Lift the sheet metal
Push the sheet metal above the SD card socket along the
opening direction (marked on the sheet metal), and then lift
it up.
3. Fix the micro SD card
Slide the micro SD card into the socket provided, with the
gold contacts facing down, until the card locks into the
place. By default, the device should mount the micro SD
card automatically.

2.3.4 Installing and Uninstalling the External Camera

There is a 13 megapixels camera built in the device, which can be used to record videos or capture pictures. You can also
install an external camera onto the device if needed.
Perform the following steps to install or uninstall the external camera:
Do not rotate or bend the connector of the external camera.
User Manual of Portable Video Recorder
16