started the recording at 10:00, the camera recorded it at 9:59:55.
Steps:
1.
Tap Settings > MED > Additional Settings > Pre-record Settings.
2.
Check the checkbox of Pre-record (Reboot to Activate) to turn on the pre-record function.
3.
Tap Pre-record Time to select the time.
4.
Reboot the PVR to activate the settings.
12.3
Overwrite Settings
Purpose:
If you turn on the overwrite function, when storage is full, the data would keep writing into the storage by replacing the
former data.
Steps:
1.
Tap Settings > MED > Additional Settings > Overwrite Settings.
2.
Check the checkbox of Overwrite to turn on the overwrite function.
User Manual of Portable Video Recorder
Figure 12. 9
Pre-Record Settings
69