HIKVISION DS-6102HLI-T User Manual page 60

2. Swipe the slider of position switch to the right side to enable the positioning settings.
The longitude, latitude, time, positioning accuracy and speed of the device will be displayed automatically when the
positioning signal is available.

To realize the BDS function, plug the additional BDS module into the device, select BDS as the positioning working
mode, and then reboot the device to activate the new settings.

Locate the device in open space to receive the positioning signal if no data is displayed.

Once positioning succeeded, system time will be synchronized with the time gotten from GPS/BDS satellite. And the
priority of positioning time synchronization is higher than time set manually or automatically.
User Manual of Portable Video Recorder
Figure 11. 21 Positioning
Figure 11. 22 Turn on Positioning
59