Table of Contents
Advertisement
1)
Input the network SSID and then select the security mode.
2)
Optionally, you can check the checkbox of Show advanced options, and then input to configure the information
including proxy settings, IP address, gateway, etc.
3)
Tap Save to save the settings. The new access point will be displayed on the Wi-Fi networks list.
5.
Select the access point on the list, input the password, and then tap the Connect button to connect the device to the
Wi-Fi networks.
You can also check the checkbox of Show password to display the password in plaintext, or check the checkbox of
Show advanced options to configure the proxy settings or IP settings.
6.
Tap the connected access point of Wi-Fi networks, and you can view the detailed information of the access point,
including status, signal strength, link speed, and so on. You can tap Forget to disconnect the device from the Wi-Fi
networks.
User Manual of Portable Video Recorder
Figure 11. 10
Join a Network
Figure 11. 11
Join a Network
53
Hide quick links:
Advertisement
Table of Contents
