Diamond Blade Dressing; Troubleshooting - daltile 1048BRS Operating Manual

MAINTENANCE & TROUBLESHOOTING
Diamond Blade
Dressing
Diamond Blades performs best when
●
they are dressed. After time and use,
diamonds on the outer edge of the blade
might become glazed or dull.
This will reduce cutting efficiency and
●
possibly cause the blade to bend.
As a result the cut will not be straight
and mis-aligned.
When this occurs, the blade needs to be
●
dressed. The Diamond Blade can be
dressed with a Dressing Stick.
(Optional Accessory, see page 19)
Dressing procedure(s):
Place a Dressing Stick on the Saw table
●
Make approx. 10 cuts through the
●
Dressing Stick
The Diamond Blade should be sharp again
and ready for efficient cutting.
PAGE 16 DALTOOL 1048BrS OPERATING MANUAL V02/2008R1