Maintenance And Troubleshooting; General Maintenance - daltile 1048BRS Operating Manual

MAINTENANCE & TROUBLESHOOTING
General Maintenance
The cooling water should be replaced
●
and/or replenished regularly.
It is recommended to clean the water
●
container, pump, hoses and spray
nozzle on a regular basis. For example,
place the pump in a bucket of clean
water after the sawing job and run the
machine for a minute or so. This also
guarantees a longer lifetime of the pump.
When the machine is not used for a
●
longer period, the pump should not
remain in the muddy cooling water.
Cleaning the pump as described above
and leaving it outside the water
container is recommended.
Regularly check the saw flanges for wea-
●
ring out and replace if necessary.
Water Pump
Saw Flanges
DALTOOL 1048BrS OPERATING MANUAL V02/2008R1 PAGE 15