Daltool Safety; Safety Messages; Damage Prevention And Information Messages; General Safety Precautions And Hazard Symbols - daltile 1048BRS Operating Manual

It is extremely important that you read and
understand all of the safety instructions, the
operating instructions and the maintenance
instructions. If these instructions are not fol-
lowed, serious injuries and/or death could
occur to you or to others. Also, failure to read
and follow the enclosed maintenance instruc-
tions can lead to equipment failure, damage
to the equipment or reduced lifetime of the
equipment.
SAFETY MESSAGES:
Safety messages are used to inform the
person(s) using this equipment of the poten-
tial hazards that could lead to equipment
damage, serious injury or even death. The
safety messages within this manual will be fol-
lowed by one of the following (3) three words
that identify the severity of the damage.
It is important that all instructions within this
manual be followed. If the instructions are
not followed it is possible that serious injuries
could occur as well as death.
It is important that all instructions within this
manual be followed. If the instructions are
not followed it is possible that serious injuries
could occur as well as death.
It is important that all instructions within this
manual be followed. If the instructions are
not followed it is possible that serious injuries
could occur as well as death.
PAGE 4 DALTOOL 1048BrS OPERATING MANUAL V02/2008R1
DALTOOL
®
SAFETY
DAMAGE PREVENTION AND
INFORMATION MESSAGES:
A Damage Prevention Message is to inform
the user of important information and/or
instructions that could lead to equipment
or other property damage if not followed.
Information Messages convey information
that pertains to the equipment being used.
Each message will be preceded by the word
NOTE, as in the example below.
NOTE:
Equipment and/or property damage may
result if these instructions are not followed.
GENERAL SAFETY PRECAUTIONS
AND HAZARD SYMBOLS:
In order to prevent injury, the following safety
precautions and symbols should be followed
at all times!
Safety Precautions:
MACHINE GUARDS SHOULD BE
●
IN PLACE AT ALL TIMES
It is important that all machi-
ne guards remain in place
and in proper working condi-
tion. This is to prevent serious
injury, death or damage to
the equipment.
REMOVE ADJUSTING TOOLS.
●
The machine is supplied with some adjus-
ting tools for equipment maintenance. It is
important that the user of the machine makes
sure that all tools are removed or in their
proper storage area before the machine is
turned on.