General Maintenance - daltile 828 BrS Operating Manual

MAINTENANCE

General Maintenance

Saw Flanges
The cooling water should be replaced
and/or replenished regularly.
It is recommended to clean the water con-
tainer, pump, hoses and spray nozzle on a
regular basis. For example, place the
pump in a bucket of clean water after the
sawing job and run the machine for a
minute or so. This also guarantees
a longer lifetime of the pump.
Water Pump
When the machine is not used for a longer
period, the pump should not remain in the
muddy cooling water. Cleaning the pump
as described above and leaving it outside
the water container is recommended.
Regularly check the saw flanges for wea-
ring out and replace if necessary.
DALTILE 828 BrS OPERATING MANUAL V02/2004R1 PAGE 15