Conventions Used In This Manual; Safety Terms - Protek 9216A User Manual

Circuit No.
F1101
F601
The internal fuse rating is as follows:
Circuit No.
F602
Note: Refer to the section on troubleshooting in the Reference Manual for instructions
on replacement of the internal fuse.

Conventions Used in This Manual

In this manual, you will find various procedures, which contain steps of instructions

for you to perform. To keep these instructions clear and consistent, this manual
uses the following conventions:
Operating procedures and names of front panel controls are in uppercase and

boldface print.
The case of each name used in the manual is the same (Initial Capitals or

UPPERCASE) as that used on the instrument itself.
Instruction steps are numbered (1, 2, 3, ), unless there is only one step.

When steps require that you make a sequence of selections using front panel

controls and keys, an arrow () is used in the text to indicate an LED result when a
front panel entry is made. Also, whether a name is a key or LED display reading is
clearly indicated:
Example:

Safety Terms

The following terms are also used in this manual:
WARNING

CAUTION

product or other property.
NOTICE

data.
.
.
.
.
.
Shape (diameter  length) mm
.
.
5.2  20
.
.
5.2  20
Shape (diameter  length) mm
5.2  20
Press DISP  (Entry)  ENTER
identifies conditions or practices that could result in injury.
identifies conditions or practices that could result in damage to this
identifies conditions or practices that could result in incorrect test
Rating
250 V T500 mA
250 V T250 mA
250 V F250 mA
Rating
250 V F250 mA
7
Remarks
For AC l15V
For AC 230 V
Remarks