Features And Options; General Features - Protek 9216A User Manual

Accuracy
better than 1% for
better than 5 % for
at the following conditions:

Features and Options

General Features

Feature
Fixture
Protection
Zeroing
Binning
Self Test
Store and Recall
memory
RS232 Interface
Operating Conditions
Power
Dimensions
Weight:
Warranty
Value
R > 0.125  and R < 16 M
L > 2.5 H and L < 25 kH
C > 1.25 pF and C < 12.8 mF
R > 21 m and R < 96 M
L > 420 nH and L < l50 kH
C > 0.21 pF and C < 77 mF
1.0V, 0.5V, or 0.25V output voltage
Slow or medium measurement speed
Q and D < 0.1 for R and C
Q > 10 for L
100Hz, 120Hz or 1 KHz test frequency for R
100 Hz test frequency for L
10 KHz test frequency for L
4-wire Kelvin fixture for parts with radial and axial leads
Protected up to 1 Joule of stored energy, 200 V DC for charged capacitors;
fused at 0.25 A output current for biased measurement
Open and short circuit compensation. Compensation Limits: short circuit:
R<20, Z<50, open circuit: Z>10k
Up to 8 Pass Bins, QDR and General Fail Bins, all defined by the front panel or
computer interface. Binning setups may be stored in nonvolatile memory
Tests the ROM, CPU, nonvolatile RAM, clock generator, A/D converter,
internal bias, multiplier, output drive circuitry, gain circuitry, and source
resistances.
Stores and recalls nine complete instrument setups. Recall 0 recalls the default
setup.
All instrument functions can be controlled or read over the interface.
0 to 50°C at a relative humidity of 0 to 80%
20 Watts, 110/220 VA, 50/60 Hz
4 ¼ " H  14 ¼ " W  15" D
12 ¾ lbs
Two year parts and labor on materials and workmanship
and C
max
and C
min
Specification
14
max
min