Measurement - Protek 9216A User Manual

Measurement

bit name
0 Math Error Set on a floating point error.
1 A/D Error Set when an A/D conversion fails.
2 Overload Set when the gain stage is overloaded.
3 Under range Set when a measurement is below the nominal range of values for the present
4 Over range
Set when a measurement is below the nominal range of values for the present
5 Out of Range Set when the unit is unable to make a valid measurement on the current range.
6 Not used
7 mem err The stored settings were invalid on power up.
range
range
usage
32