Electrolux T4290 Installation Manual page 28

28
Conversion instructions - T4530 only:
1. D isconnect the power to the dryer.
2. O pen the operating panel.
. R emove nozzle (1), see Fig. 6.
4. M ount the supplied nozzle (1), see Fig. 2.
. L oosen the measuring branch screw (2) 1/4 turn; connect a manometer to the measuring
b ranch (2), see Fig. 6.
6. C onnect the power and select a programme with heat.
. S tart the dryer.
8. S ee nozzle pressure in Fig. 2 - set the nozzle pressure on setting screw (4) under cover
s crew (), see Fig. 6.
9. C heck that the gas flame burns evenly and has a bluish colour.
10. M ount the cover screw (), see Fig. 6.
11. C lose the operating panel.
NOTE: After the conversion has been carried out, the enclosed sign with the new gas type
printed on it must be affixed to the dryer data plate, see instructions later.
Fig. 6
1
Fig. 7
ø
Installation
4 + 3
2