Electrolux T4290 Installation Manual page 25

Gas installation - table of pressure and adjustment
This gas appliance has been build to run on natural gas group I2H and I2E(LL), commonly
identified by GNH.
The data label shows the injector size and the injector pressure and the countries that use this
gas quality: DK, NO, SE, FI, CH, CZ, EE, LT, SL, TR, BG, RO, GB, ES, GR, IE, IT, PT, AT, LV,
HU, IS, SK, DE, PL, LU and non-European countries.
Before connecting the appliance please make sure that the supplied gas type is correct.
Following gas conversions are possible:
1. Appliances to be installed to run on GNH or GNL in FR, BE: I2E+
2. Appliances to be installed in NL, parts of DE and Non-European contries: I2L.
3. Appliances to be installed to run on LPG in: DK, NO, SE, FI, EE, LT, SL, TR, DE, NL,
CH, CZ, HU, GR, MT, CY, LV, SK, LU, BG and Non-European contries: I3B/P .
4. Appliances to be installed to run on LPG in: GB, ES, GR, IE, IT, PT, CH, CZ, BE, FR,
CY, EE, LV, LT, LU, RO: I3+ .
5. Appliances to be installed to run on LPG in: AT: I3B/P (50 mbar) inlet pressure.
6. Appliances to be installed to run on LPG in: PL: I3B/P (36 mbar) inlet pressure.
Fig. 1 - T4290 only
Gas group Injector size
Ø mm (1)
I2H, I2E(LL) 3.8
I2E+ 3.3
I2L (LL) 3.8
I3B/P, I3+ 2.3
I3B/P (37) 2.1
I3B/P (50) 2.3
Fig. 2 - T4530 only
Gas group Injector size
Ø mm (1)
I2H, I2E(LL) 5.6
I2E+ 4.7
I2L (LL) 6.2
I3B/P, I3+ 3.2
I3B/P (37) 3.05
I3B/P (50) 3.2
Installation
Air reducing Inlet pres-
plate (fig. 5) sure (mbar)
Ø38 20
Ø38 20/25
Ø38 20/25
NONE 30, 28/37
NONE 37
NONE 50
Air reducing Inlet pres-
plate (fig. 7) sure (mbar)
Ø40 20
Ø40 20/25
Ø40 20,25
Ø40 30, 28/37
Ø40 37
Ø40 50
Injector Label no.
pressure (fig. 10 )
(mbar)
10.5 DEFAULT
20/25 487266723
15, 2 487266723
30, 28/37 487266721
37 487266722
30 487266722
Injector Label no.
pressure (fig 10)
(mbar)
8 DEFAULT
20/25 487266733
8 487266733
30, 28/37 487266731
37 487266732
30 487266732
25