Procedure
Note—
off or unplugged), then another wave will use its channel until the
assigned wave is reactivated, provided Wave Replace Mode is enabled.
The channel will only remain blank if:
1. Press
Select Item
screen.
2. Press
Change Content
to place in your selected channel.
3. Repeat steps 1 and 2 for each wave position you want to change.
4. Press
Main Screen
If one of the assigned waves is not available (parameter switched
•
It is assigned to ECG or Blank.
•
Another wave is available, but numerics aligned to that wave are
switched off.
Assigning Waves to Screen Channels
repeatedly to select a channel on the
to move the selection to the wave you want
to return to the Main Screen screen.
Setting up your Monitor 3-9