Procedure - Philips V24CT User's Reference Manual

Procedure

Note—
successfully, it is possible to return to Monitoring Mode without entering
a password by pressing
1. Enter the password by pressing the appropriate combination of
softkeys which are numbered 1-5.
If you enter the password correctly, you can proceed with the next
step. If not, exit the Task Window by pressing
again.
2. Press the softkey
mode you require.
3. The prompt message "Press CONFIRM to switch to selected mode"
appears. Press the hardkey
The instrument goes through the boot-up sequence and reverts
automatically to default settings and the mode of your choice
becomes active.
If you have entered either Config, Service or Demo Mode
Change Opmode . Move the highlighting to the
.
Confirm
Monitor Setup
Changing Operating Modes
and try
Main Screen
Resume Monitor
Setting up your Monitor 3-57