Operating Controls - Philips V24CT User's Reference Manual

Viewing oxyCRG Episodes
The exact time an event was triggered is indicated by a vertical line
which is positioned on the graph according to the monitor's
configuration. Depending upon the user's requirements, the monitor can
be configured (in Configuration Mode) to display and store an oxyCRG
Episode in the following way:
Note—
Event Time.
The association of events is determined by the configuration of the post
event time. The events that occur during the configured two or three
minutes of post event time are associated and displayed as one event in
the Event Review and oxyCRG Episode Task Window.
Operating
In the oxyCRG task window you can:
Controls
Selecting an
Selecting the
Episode jumps from one oxyCRG episode to the next in both directions.
Entering the Selecting the
Event Review
task window. The event last selected in the oxyCRG Episode task
Task Window
window will be selected here.
9-16 Neonatal Event Review
• Two minutes of Pre-Event Time / Two minutes of Post-Event Time
(the default) or
• One minute of Pre-Event Time / Three minutes of Post-Event Time
In both cases manual events are displayed with four minutes Pre-
1. Select the previous episode.
2. Select the next episode.
3. Return to the Event Review task window.
4. Record an episode.
5. Print an episode.
6. Delete an event.
Previous Episode
Event Review
Next Episode
and/or
softkey returns you to the Event Review
softkeys