Setting The Volume Control - Philips V24CT User's Reference Manual

Alarm Setup
Setting the
The QRS and the alarm tone volume can be set independently.
Volume
Control
Note—
as pressure or pleth. See Chapter 14, "ECG and ECG/Respiration Module
Section" for more details.
Note—
the
5-14 Alarm Functions
1. Press
Alarms/Volume
2. Press Volume Control
The QRS and alarm tone are each represented by the outline of a
triangle which can be filled in. When the triangle is completely
filled, this represents maximum tone volume.
3. Press the up and down arrow softkeys to fill each triangle to the
required amount. If there is no current alarm or INOP, two short
alarm tones will sound each time the alarm tone keys are pressed
so that you can hear the effect of changing the volume.
4. Press
Main Screen
The QRS tone can be derived from other sources than ECG such
Tone Modulation can also be set to On or Off in this window using
On/Off Tone Mod. key.
hardkey.
in the Alarms Selection Window.
to return to the Main Screen.