Other Functions You Can Configure - Philips V24CT User's Reference Manual

Other Functions You Can Configure

Parameters On/Off
Individual parameters can be switched ON or OFF on the monitor. No
alarms or INOPs are reported for parameters that are switched off, and
they are not available for display, trending, or recording on the monitor.
Module Setup
Parametr On/Off
1. Press the softkey
parameter. To view parameters which are not displayed, press the
Next Page
softkey
2. Press the softkey
or off. Repeat this procedure for each parameter you want to set.
3. Press the softkey
settings when the module is plugged in WITHOUT the transducer.
Switch this setup off again using
Other Functions You Can Configure
Select Parametr to highlight the required
.
On/Off Parametr to set the selected parameter on
On/Off Setup if you want to preset parameter
On/Off Setup
or
Silence/Reset
Setting up your Monitor 3-33
.