Installing The Usb-1208Fs; What Comes With Your Shipment; Hardware; Software - Measurement Computing us-1208fs User Manual

Installing the USB-1208FS

What comes with your shipment?

The following items are shipped with the USB-1208FS.

Hardware


USB-1208FS

USB cable

Software

MCC DAQ Software CD

Documentation

MCC DAQ Quick Start Guide
The Quick Start Guide booklet provides an overview of the MCC DAQ software you received with the device,
and includes information about installing the software. Please read this booklet completely before installing any
software or hardware.

Unpacking

As with any electronic device, take care while handling to avoid damage from static electricity. Before
removing the USB-1208FS from its packaging, ground yourself using a wrist strap or touch either the computer
chassis or other grounded object to eliminate any stored static charge. If the device is damaged, notify
Measurement Computing Corporation immediately by phone, fax, or email.

Knowledgebase:

Phone: 508-946-5100 and follow the instructions for reaching Tech Support

Fax: 508-946-9500 to the attention of Tech Support

Email: techsupport@mccdaq.com
For international customers, contact your local distributor. Refer to the International Distributors section on our
web site at www.mccdaq.com/International.

Installing the software

Refer to the Quick Start Guide for instructions on installing the software on the MCC DAQ CD. This booklet is
available in PDF at www.mccdaq.com/PDFmanuals/DAQ-Software-Quick-Start.pdf.

Installing the hardware

Be sure you are using the latest system software
Before installing the device, run Windows Update to update your operating system with the latest HID and USB
drivers.
To connect the USB-1208FS to your system, connect the USB cable to a USB port on your computer or to an
external USB hub that is connected to your computer.
The USB-1208FS installs as a composite device with separate devices attached. When you connect the
USB-1208FS for the first time, a
is normal. After the device is installed its LED blinks and then remains on. This indicates that communication is
established between the USB-1208FS and your computer.
kb.mccdaq.com
Found New Hardware
dialog opens as each device interface is detected. This
7
Chapter 2