Table of Contents
Advertisement
1. In the SiS VGA Configuration System screen, choose the power
saver item to enter the Power Saver screen.
2. In the Power Saver screen, choose which options you would like to
use.
3. After completing the selections, choose "OK" to make all your
selections effective.
4. After a complete setup, the power saver mode should take effect.
1. Double-click on "Control Panel" in the Main group.
2. Double-click on the Display icon.
3. Select Change Display Type from Display Settings.
4. Select "Change" from Display Type.
5. Select "Other" from Select Device.
6. Insert the Windows NT 3.5x Installation Disk into the floppy drive.
7. When the Install from Disk dialog box appears, type the directory
storing the drivers and click "OK"
The Win NT 3.5x directory is "A:\WINNT35".
8. Select "Install" and click "Yes" when the Installing Driver dialog
box appears.
9. Select "New" when the Windows NT Setup dialog box appears.
10. Click "Continue".
A message will appear stating that the drivers were successfully
installed; click "OK". You must now restart Windows NT 3.51.
Chapter 4 SiS 5598 VGA Drivers 79
Advertisement
Table of Contents
