Table of Contents
Advertisement
Take off the bracket.
Loosen 3 screws on the bottom left side of
power Board. (Torque: 50~60 Nm)
Unplug 1 connector on power Board and
cable from concave of power module.
Loosen 2 screws on the top left side of power
Board. (Torque: 50~60 Nm)
Loosen 3 screws on the left side of power
Board. (Torque: 50~60 Nm)
Unplug 1 connector on power Board and cable
from concave of power module.
40 of 73
Advertisement
Table of Contents
