Table of Contents
Advertisement
4-5 Fan E Board & HD BaseT Board & Micor control Board & RJ-45 Board
Loosen 2 screws and unplug 5
connectors on the Fan E Board. (Torque:
50~60 Nm)
Loosen 3 screws on the HDBaseT Board.
(Torque: 50~60 Nm)
Unplug 23 connectors and loosen 3
screws on the Micor control board.
(Torque: 50~60 Nm)
Take out the Fan E Board.
Take out the HDBaseT Board.
Disconnect the left connector under Micro
control board.
25 of 73
Advertisement
Table of Contents
