Table of Contents
Advertisement
A. Use RS-232 comment to Retrieve Error Code
Step0. A. Connect the AC power of the projector and have the projector in standby mode.
Step1. A. Connect the RS-232 cable between the projector and the PC.
B. Open a terminal program (e.g. Tera Term) with the following setting, baud rate 115200,
Databit: 8, Parity: none, Stop:
1
bit, Flow control: none.
C. Press keypad "Menu"
"Input"
(for 3
+
seconds). And, RS-232 mode systems will feedback
"Delta
Mode".
11 of 73
Advertisement
Table of Contents
