Table of Contents
Advertisement
Open Fan 3 module.
Loosen 3 screws on Lamp 2 module.
(Torque: 70~80 Nm)
Take out the Fan 2 module. And, loosen 4
screws on it and open the cover, then
loosen 4 plastic pin. (Torque: 110~120 Nm)
Loosen 2 screws on the Fan 3, and then take
off Fan 3. (Torque: 50~60 Nm)
Take out the Lamp 2 module.
Open Fan 2 module.
31 of 73
Advertisement
Table of Contents
