Table of Contents
Advertisement
Unplug the 2 connectors and loosen 2 screws
on the Fan D Board. (Torque: 50~60 Nm)
Loosen 6 screws on the FIP signal cable in
the bracket. (Torque: 50~60 Nm)
Take out the 2 group cables from fasten tie and 1
group cables concave space in the bracket.
4-7 Fan D Board & Bracket Plate
29 of 73
Take out the Fan D Board.
Take out the 2 group cables from concave
space in the bracket.
Take out the bracket.
Advertisement
Table of Contents
