Table of Contents
Advertisement
Unplug 5 connectors and loosen 2 screws
on the Fan C Board
Loosen 2 screws on the bracket.
Use 5mm inner hexagonal screwdriver to
loose 6 inner hexagonal screws on the
RS-232, VGA and DVI port of left cover.
(Torque: 30~40 Nm)
4-4 Fan C Board & IO Port
(Torque: 50~60 Nm)
.
Take out the Fan C Board.
Take out the bracket.
Loosen 2 screws on the 3 RCA YPbPr port
of left cover. (Torque: 50~60 Nm)
23 of 73
Advertisement
Table of Contents
