Table of Contents
Advertisement
4-9 Back Cover & Keypad & Rear IR Board
Loosen 4 screws on the right and bottom
side of cover.
Take off the back cover.
Loosen 1 screw and unplug 1 connector on
the rear cover. (Torque: 50~60 Nm)
Loosen 8 screws on the left side of cover
and two Fan modules.
Loosen 4 screws and unplug 1 connector on
the rear cover. (Torque: 50~60 Nm)
Take off the Keypad & Rear IR Board.
33 of 73
Advertisement
Table of Contents
