Specifications - Vacron MDE16 User Manual

2CH Mobile Video Recorder

Specifications

C.
 DVR Specification
Items
Video input
Frame Size
Voltage and
Current
Power supply
Operating
Temperature
Storage
Recording
Recording
Content
Storage
format
Time setup
Input and
output device
Description
2 Channel, support similar 2 channel cameras
NTSC: 30 fps (D1); PAL: 25 fps (D1)
DC12V, 250mA (When the old capacitor is charging, Host
voltage and current are about 500mA)
(a) ACC ON power offer by 12V vehicle battery
(b) ACC OFF delay about 30 seconds shut down the main
power
(c) ACC OFF Standby current 5mA or less
(d) Built-in gold capacitor, after the main power shut down, it
can be delayed for 3 seconds to save the file for the host.
-15°C~ 50°C
Recommend to use SDHD card, 4G or above, class 10 or
better.
Automatically starts continuous recording when powered on
Date, time, video, audio
Specific file format, need to play with a dedicated play
software
Automatic calibration by GPS signals. If GPS signal is
unavailable, internal clock will be used.
(a) Red light：Flashing indicates the video is recording
(when G-sensor active, the red light flicker higher
frequency).
(b) Green light：Light always on is indicated power on.
(c) DC12V power input.
(d) Image input aperture (1 Vp-p composite video output, 75
ohms), video input has to distinguish between PAL or
NTSC system.
- 3 -
User Manual