Index A. Feature Description .................. 1 B. Schematic Diagram Of The Installation Steps .......... 2 C. Specification ..................... 3 D. Product Appearance ................. 4 E. Recording And Stop Recording ..............5 F. Remote Controller Description ..............5 G. Operation Setting ..................6 OSD List Menu ................
A. Feature Description Built-in Full HD 5M CMOS Sensor. View angle approx. 105 degrees. Easy installation. Suitable for all types of vehicles. Equiped with 3 inch TFT LCD screen provides a platform for composing and playing back your footage, while the fixed focus lens keeps things simple.
B. Schematic Diagram Of The Installation Steps Two type of brackets installation for selection, Suction-cups type and stick-holder type. A. Suction-cups type Make the bracket facing upward, assemble the suction cups, setup the machine in proper position, adjust the viewing angle. B.
E. Recording And Stop Recording Speake Green indicator Remote control receiver Red indicator Manual force recording Yellow F. R emote Controller Description Key mapping table for remote controller: Playback Camera/ Camcorder/ Manual Force Recording Motion Mode Switch Volume Down Volume Up Stop Voice Recording Speaker On/Off...
Operation Setting OSD List Menu Setup Menu Camcorder Menu Camera Menu Motion Menu Please use IR controller to select function List Function Key on IR Controller List Moving [LEFT OR RIGHT ] Bar Moving [UP OR DOWN] Confirmation [CONFIRM ] Go to Previous Menu or Main Menu...
Setup Menu ◆ Language Setting ★ English / French / German / Italian / Japanese / Korean / Portuguese / Russian / Traditional Chinese / Spanish / Simplified Chinese / Turkish / Dutch…etc ◆ Date/Time Setting LIST FUNCTION [UP/DOWN] LIST MOVING [R/L]+[CONFIRMATION]+[UP/DOWN] CONFIRMATION [CONFIRM]...
Page 10
◆ TV Standard Setting ★ NTSC/ PAL for selecting ★ TV output format, according to different national systems using the input format for the TV set, the system is preset to NTSC (Taiwan TV image is NTSC). When input the image causing TV screen which appears black and white, beat, we can switch to PAL TV screen to check returning to normal status.
Page 11
◆ Mic ON/OFF Setting Microphone off Microphone on ★ Microphone to record the sound of inside vehicle information, if concern about personal privacy information, proposed close microphone function (off microphone function, converting the image files to video without sound state). ◆...
Page 12
For fine weather. Daylight mode Cloudy mode For cloudy, dark or twilight. For warm white, cool white (3- Fluorescent mode wavelength) fluorescent lighting For incandescent lamps and bulb-type Incandescent mode 3-wavelength fluorescent ◆ Effect Setting ★ Color / B & W / Retro color ★...
Page 13
Retro mode ◆ Sensor SEN Setting ★Caution You can adjust the sensitivity level (more number of green bars stands for higher sensitivity) ★ When vehicle drives through darker areas, “sensitivity” decides whether “white balance” is going to be functioned or not. If “sensitivity “ is set more sensitive, as vehicle drives into darker areas, “...
◆ Default Setting ★ Cancel Factory Default Setting / Confirm Factory Default Setting ★ When selecting “Default”, it goes to “Main Menu”. ★ When going to “Default”, it will automatically go to factory default setting. For changing further setting, please go to main menu. Camcorder Menu ...
Page 15
G-Sensor Setting ★ NOTICE: More Stripes; More Sensitivity to trigger G-sensor easily for forced recording. ★ Each time for triggering force recording, it will be automatically saving 3 more minutes before and after the accident. Capture Mode Setting : Motion mode / : Normal mode ★...
◆ G-sensor Setting ★ Notice: Higher sensitive of G-sensor, Easier to trigger forcing video recording. After force recording is triggered, 3 consecutive pictures will be taken automatically. Motion Menu Motion Type Setting : Constant Motion Recording. ★ :Full Screen Motion Recording. (For this setting, ★...
Spot Size Setting ★ Sizes: 60x60 / 60x120 / 120x60 / 120x120 / 180x180 Motion Sensitivity Setting ★ More Stripes, More Sensitivity Playback 1. Direct playback on machine side Build-in accelerometer, the system automatically determine the level of the screen visualization, and make the screen self-rotated to normal position.
Page 19
★ You must disable the protection function first in order to process the deleting procedures. ◆ Playback settings- Delete All ★ You must disable the protection function first in order to process the deleting procedures. ◆ Playback file setting-protect Notice: When an icon of lock is appear, this specific video data is protected.
3. Snapshot playback Press “ Playback” on remote controller under Snapshot mode. Select the timing of snapshot pictures. Rotation [Confirm] key Next [R/L]key Zoom [U/D]key ◆ Photo playback settings-Delete one ★ You must disable the protection function first in order to process the deleting procedures.
Page 21
Notice: When an icon of lock is appear, this specific video data is protected. ◆ Photo playback settings-Autoplay Each Snapshot will display in every 5 seconds. Press “Menu” for stop.
I. Software operating instruction 1. Remove SD card from card slot of host side 2. Put the SD card to the card reader 3. Connect card reader to the USB port of PC side ,which is 4. Choose the file to play: Execute “TransportStream.exe” located in the product CD folder, Screen shown as below.
Page 23
2. Operating Interface Description: Return to last file key Forward playback Playback key Pause key Stop key Play key Forward playback Go to next file key Mark starting point of back up file Mark ending point of back up file Backup the marking file Open document, select the file to play Backup the current playing file...
Page 24
Playback speed Fast forward with 2 times or 4 times, and playback with 0.25 times, 0.0625 times Volume control Select the file to playback Select “Open the document” , and then choose the file of memory card or hard disc.
Page 25
Snapshoot Tool Play record from SD card first and then use Snapshoot tool to capture the screen. When select Snapshoot tool, it will appear the following window. (The picture of display screen will save in capture storage folder path.) Related settings Software version related information and SD card data storage settings (a) Storage path of Snapshot: the location to save images in the computer...
Page 26
(b) Language: select language settings of playback software. (The settings will work after re-open the software) (c) The mode of User Interface Set the display mode of host. (To change the configuration option, it must insert SD card into the Vehicle Video Recorder).
Page 27
Playback selecting by Hours (24-hours) After select the "Date" with Gray-brown color, on Hour/Minutes table will display Red/Green color. Green: normal record Red: force record Playback selecting by minutes Click the minutes table to change the recording footage immediately.
J. Formatting memory card When should you need to format the SD card? When you purchase a new SD card, you have to format it for vehicle video recorder to record properly. Procedures for new SD card formatted as follows: 1.
Record Time Estimation (based on constant record mode with 8GB card) *The chart of estimated record time listed below is for reference only. The length of time recorded can be varied due to variation in image size may be somewhat different. Video Format (NTSC / PAL) Resolution...
Appendix: The Indication of Bright and Dark Spot of LCD Q: What is Bright/Dark Spot? A : Bright Spot: At dark background, we found the abnormal bright spots, we called those spot are “Bright Spot” Dark Spot: At multiple color background (excluded dark background), we found the abnormal dark spot, we called those spot are “Dark Spot”...