Hp Web Jetadmin Installation; Microsoft Print Management Console - HP ProLiant DL100 G2 Administration Manual

Figure 32 Microsoft Print Management Console
HP recommends that you use the Microsoft Print Management Step-by-Step Guide on the Documentation
CD for print concepts, use of the PMC, and management of network printers. The guide can also be
downloaded from http://www.microsoft.com/printserver.
When running the PMC on a server that has Windows Firewall enabled, no printers will be displayed in
the printers folder of the PMC. In order for printers to be displayed, you need to open the file and print
sharing ports (TCP 139 and 445, and UDP 137 and 138). If this does not fix the problem, or if these
ports are already open, you may need to turn off the Windows Firewall to display printers.
To open the file and print sharing ports:
1.
Click Start, point to Control Panel, and click Windows Firewall.
2.
On the Exceptions tab, ensure that the File and Printer Sharing check box is selected and click OK.
To turn off Windows Firewall:
1.
Click Start, point to Control Panel, and click Windows Firewall.
2. Select Off (not recommended) and click OK.

HP Web Jetadmin installation

HP Web Jetadmin is used to manage a fleet of HP and non-HP network printers and other peripherals
using a web browser. Although not preinstalled, the Web Jetadmin software is located in the
C:\hpnas\Components\WebJetadmin folder, and can be installed by running the WJA.exe
setup program. Follow the installation wizard and supply a password for the local "Admin" username
account and a system name.
After installation, Web Jetadmin should appear on the HP Storage Server Management Console under
Print Management (see
way to reach WJA after installation is through Start > Programs > HP Web Jetadmin > HP Web JetAdmin.
88 Print services
Figure 30). If not, exit out of the console and open the console again. Another