Factory Image; Physical Configuration; Two-Hdd Configurations; Commonality Between Dl100 G2Storage Server Configurations - HP ProLiant DL100 G2 Administration Manual

Table 5 shows hardware commonality between DL100 G2 models.
Table 5 Commonality between DL100 G2storage server configurations
Feature
Server family
Chip set
Expansion slots (2 total)
Hot plug cage
Hot plug back panel
Power supply (single, NHP)
DVD-ROM (8X)
1.44 floppy disk drive
Fans (11 total)
NIC (embedded)
SCSI (U320 embedded)
Chassis
Rail kit included

Factory image

The DL100 G2 ProLiant Storage Servers are set up at the factory with logical partitions for the operating
system and user data. No additional storage configuration is needed.
Physical configuration
Depending on the model and version of the OS, each storage server comes with either two or four Serial
Advanced Technology Attachment (SATA) hard disk drives (HDDs). The sections below describe how
these HDDs are configured for each storage server based on whether two or four HDDs are installed.
Two-HDD configurations
The two HDDs included with the storage servers are configured for software RAID fault tolerance using
the motherboard SATA controllers.
The HDDs for the DL100 G2 (Workgroup, 2 drive) are hot-pluggable, but not hot-swappable. The drives
can be removed or inserted while the power is on, but user intervention is needed to rebuild the arrays.
Microsoft Disk Manager is used to present the HDDs to the system as dynamic disks. The primary OS
logical drive resides on disk 0 and is mirrored on disk 1 (see
logical drive mirroring the remaining space on disk 0 with disk 1.
32
Storage server specifications and image configurations
Item
ProLiant DL100 G2 Storage Server
Intel Mukilteo memory controller, Intel ICH7R controller, Intel PXH-V PCI
One PCI-X 64-bit 133-MHz standard height, full-length
One PCI-X 64-bit 133-MHz low-profile, half-length
SATA
Yes
350 Watts
Yes
No
Two in power supply
Nine in chassis
Two BCM 5751 and 5721 10/100/1000
IPMI 2.0, Hitachi 2168 BMC
1U rack
Yes
Figure 5). The data volume is the second