Authentication Table - HP ProLiant DL100 G2 Administration Manual

Table 11 Authentication table
Domain controller type
Legacy domain controller
(pre-WSS2003)
Recent domain controllers
(WSS2003 and later)
The S4U set of extensions to the Kerberos protocol consists of the Service-for-User-to-Proxy (S4U2Proxy)
extension and the Service-for-User-to-Self (S4U2Self) extension. For more information about the S4U2
extensions, see the Kerberos articles at the following URLs:
originalContent/0,289142,sid45_gci1013484,00.html
http://msdn.microsoft.com/msdnmag/issues/03/04/SecurityBriefs/default.aspx
developers).
Installing NFS Authentication DLL on domain controllers
NOTE:
If the authentication software is not installed on all domain controllers that have user name mappings,
including primary domain controllers, backup domain controllers, and Active Directory domains, then
domain user name mappings will not work correctly.
You need to install the version of NFS Authentication included with Services for UNIX 3.5. You can
download Services for UNIX 3.5 at no charge from http://go.microsoft.com/fwlink/?LinkId=44501.
To install the Authentication software on the domain controllers:
1. From the SFU 3.5 files, locate the directory named SFU35SEL_EN.
2.
On the domain controller where the Authentication software is being installed use Windows Explorer
to:
a. Open the shared directory containing setup.exe.
b.
Double-click the file to open it. Windows Installer is opened.
NOTE:
If the domain controller used does not have Windows Installer installed, locate the file
InstMSI.exe on the SFU 3.5 directory and run it. After this installation, the Windows
Installer program starts when opening setup.exe.
3.
In the Microsoft Windows Services for UNIX Setup Wizard dialog box, click Next.
4. In the User name box, enter your name. If the name of your organization does not appear in the
Organization box, enter the name of your organization there.
5.
Read the End User License Agreement carefully. If you accept the terms of the agreement, click I
accept the terms in the License Agreement, and then click Next to continue installation. If you click I
do not accept the License Agreement (Exit Setup), the installation procedure terminates.
6.
Click Custom Installation, and then click Next.
7.
In the Components pane, click the down arrow next to Windows Services for UNIX, and then
click Entire component will not be available.
8. Click the plus sign (+) next to Authentication Tools.
9. In the Components pane, click the plus sign (+) next to Authentication Tools.
10. Click Server for NFS Authentication, click Will be installed on local hard drive, and then click Next.
Legacy NFS (pre-WSS2003 R2) MSNFS (WSS2003 R2)
Requires NFS Authentication DLL
on domain controller
Requires NFS Authentication DLL
on domain controller
(intended for IT professionals) and
HP ProLiant DL100 G2 Storage Server administration guide
Requires NFS Authentication DLL
on domain controller
Uses the built-in S4U (on the
domain controller). It is unaffected
by the NFS Authentication DLL on
the domain controller.
http://searchwindowssecurity.techtarget.com/
(intended for
101