The Hp Netstorage 6000 Web Interface - HP NetStorage 6000 User Manual

Overview

The HP NetStorage 6000 Web Interface

Redundant Power Supply Cords
The HP NetStorage 6000 Web Interface
Note
1-9
The HP NetStorage 6000 lets you attach more than one power source into
the back of the unit. This redundancy protects against a power failure. The
primary power cord needs to be connected when power is turned on.
The HP NetStorage 6000 is managed via a web browser as shown in
figure 1.6 on page 1-10 (Internet Explorer 5.0 or later or Netscape 4.61 or
later). To access the web interface, enter the IP address of the HP
NetStorage 6000 in the address field of your browser.
The first time you open this interface, a security warning appears. The
NetStorage web interface uses Java and Javascript components to properly
display system information. Your browser detects that such programs are
running and asks for your permission to accept these software
components. You must accept content from or grant privileges to Hewlett-
Packard Company. To prevent further security warnings from appearing,
check the box at the bottom of the window to always trust content from
Hewlett-Packard Company.