Wired Ethernet Control Setup - PRESONUS studiolive III series Owner's Manual

11 Resources
11.1 Networking Overview

Wired Ethernet Control Setup

11.1.1
Ethernet
cable
Network router
Lap top
A wired Ethernet setup is the simplest:
1. Connect standard CAT5e or CAT6 Ethernet cables from your computer's Ethernet
port to an Ethernet router, and from the router to the Control port on the
StudioLive's rear panel.
2. Launch Universal Control on the computer (macOS or Windows) that is
connected to the router.
3. When Universal Control launch window appears. Tap on your mixer's icon to
launch UC Surface.
For more information on UC Surface, see the StudioLive Software Library
Reference Manual.
Ethernet cable
Using a wireless router, you can also connect your computer wirelessly:
Windows 7+
1. Click on the network icon in the notification area to open the Connect to
Network Control Panel.
2. Select the name of the wireless network you set for your wireless router.
3. Enter the password.
4. Click Connect.
Ethernet
cable
Network router
StudioLive™ Series III
Owner's Manual
Touch screen
computer
Laptop
88