Loading A Session For Playback - PRESONUS studiolive III series Owner's Manual

7 SD Recording
7.2

Loading a Session for Playback

7.2 Loading a Session for Playback
When you've entered the artist name, performance name, or location for one Session,
it is saved for easy use in future sessions (up to 10 of each category at a time). Saved
designators can be easily selected by touching the drop-down menus in the right
column of controls on this page. Use the Master Control encoder to scroll through
choices.
Once you've entered the needed information for your new Session, touch Create in
the touchscreen to create the new session, or touch Cancel to cancel this operation
and exit the New Session screen. Once a new Session is created, the Capture screen
is displayed on the touch screen, and you can begin recording. For more information,
see Section 7.3.
When the Live Performance Edit screen is displayed on the touchscreen, you can load
a previously recorded Session for playback or Virtual Soundcheck, by touching Load
Session on the touchscreen. This brings up the Load Session screen.
In this screen, you can select from a list of existing live recording Sessions on the
currently selected playback medium. Scrolling buttons on the right side of the
touchscreen let you scroll through the available options.
To load a session for playback:
• Touch the Session of your choice to select it. The Recall button flashes.
• Press Recall to load the Session.
• Once the Session is loaded, the Capture screen is shown, and you can begin
playback of your Session.
When the Load Mix button is active, the mix Scene stored with the session will also
load. The parameters that are loaded are filtered according to the settings in the
Scenes screen. For more information on creating and recalling mixer scenes, see
Section 8.5.3.
StudioLive™ Series III
Owner's Manual
59